Zorand He talked about it in one of his early factory tours, can't really recall which one it was. Not that ghost building is a big secret in the internet age...it's long been done - in the US 'student' ranges were built for supermarkets/etc either in US factories (my harmony bass was made in the gretsch factory in 1964!) or later in Japan (Teisco, Kawai, President etc). I'm such a sucker for those wierd japanese things ?

Maybe try these series of tours,
for some reason the korean one rings a bell.

Thanks V8!
I also have an affinity for weird or different Japanese (and other) guitars. A President strat-like guitar is the first I started learning to work on guitars. I still use it for experiments and plays well when I put it together.

I finally finished the Ibanez Gio P90 and put it together. Unfortunately, there is no information in the neck pocket or the neck (it was worth a try - thanks tedibear).

Apologies for the image intensive post!

Thanks for the link. Great work and great post!

Some day I might write about all the "fun" I had restoring this one (see pic below) but it's too soon. The memories of the blisters, sweat and tears are still too fresh!

I restored it to almost original, the pickups were dead and 2 saddles broken, and then decided to change a few things. It took me a week just to figure out what it is, an Aria Pro II YS500, and about 2-3 months to restore. I've learned quite a lot in the process (steam dents, etc.) and very happy with the result.

Zorand Aria Pro II YS500, and about 2-3 months to restore. I've learned quite a lot in the process (steam dents, etc.) and very happy with the result.

This isn't a wierdo...but a winner. Love the Aria Pro II's. imho - custom shop quality at everyday prices. I've been on the lookout for a bass version that 'speaks to me', seen a few but still waiting for one that is somewhat unloved, but not completely trashed.

Sure @Tuckstir and the other builders around here would love to see that thread, particularly steaming out dents, I havn't read/seen anything about that process before.

I'm no builder, serious lack of patience and skills. But I have a talent for setups, particularly basses and strats.

If you are bored between builds, here's a collection of GT projects I've been maintaining, all sorts of wierd and wonderful in there: https://community.guitartalk.co.za/d/25403-buildmodrefurb-threads/11

Zorand Apologies for the image intensive post!

never apologies for giving us eye candy... in fact I believe you need more pictures... more I say

V8 Sure @tedibear and the other builders around here would love to see that thread, particularly steaming out dents, I havn't read/seen anything about that process before.

you know me tooo well
love seeing builds, and customized jobs on here..

as for steaming of dents..have not needed to use it yet.. but have seen the process while doing research for projects before..

here's a YouTube clips one of many

Zorand and very happy with the result.

And so you should be! She's a beaut!

Thanks guys.
A praise from people that actually appreciate and do this kind of stuff (and much more!), means a lot.

I will write up about the restoration when I have some more time.

I've seen that video on how to steam dents and it works (most of the time). That's how I learned but it takes much more time and effort to do it on hard maple (neck) than on pine wood. Patience is the key, and constant checking and wetting the cotton cloth. I mean, literally after every touch with the soldering iron, you have to check. It is not brain surgery but definitely no shortcuts here. I started on a scrap piece of maple and burned it a few times. I hated doing it but now I like it and I've done it on every guitar neck that hasn't got a finish (mine or for friends). A dent on a guitar body doesn't bother that much but on the neck, it just irritates the hell out of me.

Anyway, here is 2 pictures. I didn't take a picture when it was done, but you'll get the idea and you can see how the dent is getting smaller. The maple on the body is softer than on the neck so it went a bit quicker.

Tuckstir as for steaming of dents..have not needed to use it yet.. but have seen the process while doing research for projects before..

What kinda magic is this!!!! That's amazing, thanks!

I used basically the same technique to take out a perloid insert on a friends Gibson Les Paul Custom Lite. Steaming through a cloth until the glue disolves. The trick is not to disolve the glue under the frets as well!

Zorand I'm sure I will learn a lot

I reckon the best one for that would be lapdawg's LP '59 build, that was sheer pron from start to finish. When ya get around to starting up thread(s) on your's I'll add them.

Zorand Maybe I've learned some skills but the patience part is the real struggle!

When it comes to building/modding I have almost none, just want to hear the lady sing again!

Hi!! I am Guillo from argentina (sorry about my english) i am the owner Of the unique specimen Of this Ibanez model in Argentina, and i have the same problem (unknow model) twin guitar Of post!! I find in all internet , ibanez models, everywhere. Only see some info about some ghostrider proyect in ibanez laboratory (LA) talk about a fusion of Artist model with P90 a prototype of the first ghostrider guitars but soo diferent of the final models (plane top, tein color of the post pica, position of controls, same neck,etc.) Twin guitars. Somebody have acualized info about this model??? Please help!!! Is an existencial problem thanks!!