(Log in to disable ads.)

Tuckstir Didn't know was the mid Pup not been connected to the tone controls..

It's usually the bridge pup that isn't connected to a tone pot. The mid & neck usually have their own individual tone controls.

Tuckstir what is of particular interest to me at the moment is the spring vs rubber mount..

Some peeps complain about hearing the noise of the springs (I guess, if pups are microphonic - which many vintage and cheap ones are). Others prefer the greater control over the adjustment with rubber tubes instead of springs.

When I was trying to eliminate any extraneous noise in my midi guitar attempts - pickup springs were one potential source of 'crosstalk'.

I saw that raru now stock this : https://raru.co.za/musical-instruments/4659875-fender-pickup-mounting-rubber-tubing-1-set-of-12

But if you know someone in the rubber industry - get some surgical grade tubing - AFAIK, it's the same thing.

      V8

      V8 It's usually the bridge pup that isn't connected to a tone pot. The mid & neck usually have their own individual tone controls.

      sorry misread.... its been one of those days..

      V8 But if you know someone in the rubber industry - get some surgical grade tubing - AFAIK, it's the same thing

      I've had this https://raru.co.za/musical-instruments/6748941-allparts-electric-guitar-300mm-silicone-surgical-tubing-for-pickup-spring-replacement-frosted-white in my shopping cart waiting to click for awhile now for my project... I think its slightly better value than the pre-cut ones..

      thanks for your breakdown.. its a bit clearer than the article.. i.e I understand better what they where trying to say.

      • V8 likes this.
      • V8 replied to this.

              Should you ever get bored with the normal strat wiring there are hundreds? of options, most are reversible:

              https://guitarwiring.blogspot.com/
              https://guitarelectronics.com/guitar-wiring-resources/
              http://www.blueguitar.org/schems.htm#MiscFX
              http://www.guitar-mod.com/rg_diag_strat.html
              http://singlecoil.com/frmset.html
              and the list goes on and on and ....

              The most useful mods that I have tried is to line all the cavities with copper tape (with conductive adhesive) as well as the back of the scratchplate as the aluminium foil just does not do it for me. You could also use conductive paint from RS Components it works just as well but you run the risk of getting it on the guitar finish if you are not careful.

              I then also used a small holesaw to cut a disc from pc board that is the same size as the back of a pot. I then glued the disc onto the back of the pot and soldered all the ground wires to this pc board disc using it as a star ground.

              Another useful option is to use a superswitch which you could get from Raru when they have stock once again:
              https://raru.co.za/musical-instruments/6748473-allparts-electric-guitar-4-pole-5-way-super-switch-blade-pickup-selector-nickel
              https://raru.co.za/musical-instruments/4938768-dimarzio-ep1112-five-way-multipole-pickup-selector-inc-black-and-white-knobs
              they were a lot cheaper not too long ago put I suppose this is due to the exchange rate. Once you figure out how this switch works many options are available without changing or drilling holes in the pickguard for extra switches etc.

              wow guys, thanks a bunch for making such an interesting/resourceful thread. kudos.

              Tuckstir sorry misread.... its been one of those days..

              No worries, I'm being pedantic, that kinda week - apologies

              Tuckstir 've had this https://raru.co.za/musical-instruments/6748941-allparts-electric-guitar-300mm-silicone-surgical-tubing-for-pickup-spring-replacement-frosted-white in my shopping cart waiting to click for awhile now for my project... I think its slightly better value than the pre-cut ones..

              Sure we had this conversation in whatsapp? Great to add it to this thread - thanks ?. Can't believe the 4x+ markup Fender has on some teeny bits of rubber...

              Tuckstir thanks for your breakdown.. its a bit clearer than the article.. i.e I understand better what they where trying to say.

              Ahh, I try to add a little value ?. That is a rather comprehensive article, it's tough to get into that detail and still cover everything.

              One thing for @wern101 to think about is when you go for a master tone, it leaves a pot free to do something with - I've got a blend wired up to the neck pup. Like @JohanP posted - literally endless possibilities.

                    V8 sounds like a wah (in his hands, anyways...

                    Uhm...errm... yeah. Not even going to try that. Bliksem.

                    V8 Hehehe, google Joe Bonamassa... ?

                    Will do! Thanks.

                    JohanP Should you ever get bored with the normal strat wiring there are hundreds? of options, most are reversible:

                    Good grief! I honestly did not know there were so many options. Thanks @JohanP

                    V8 One thing for @wern101 to think abou

                    That one thing plus the other 734 things. My head is spinning....

                    Thing is, I am seriously considering going Humbucker with this mod, with a typical LP Switch.... aargh! Decisions, decisions...

                            wern101 V8 Hehehe, google Joe Bonamassa... ?

                            Will do! Thanks.

                            The man reallly knows his gear. I mean like really ?

                            wern101 Thing is, I am seriously considering going Humbucker with this mod, with a typical LP Switch.... aargh! Decisions, decisions...

                            A HSS strat is never a bad idea. I've very fond memories of my HSS Yahama Pacifica. Don't underestimate the power of the 5way (let alone a superswitch). Getting position 4 (middle+neck) is a thing.

                                wern101

                                wern101 Thing is, I am seriously considering going Humbucker with this mod, with a typical LP Switch.... aargh! Decisions, decisions...

                                NO NO NO...
                                3 mini Humbuckers with coil splitting \ phase reversing switches .. with a dual tone wiring mod and a jaguar style rhythm/lead circuit.

                                but on a serious note..It sounds like you been overwhelmed by choices.. what are you actually looking to get out of your build? do you want to go more LP or more strat sounding?

                                    V8 The man reallly knows his gear. I mean like really ?

                                    Look at all that gear!!! O.M.W! So many amps! Looks like a bloody music shop. I WANT!!! Such a great video, and so informative. Thanks!

                                    V8 A HSS strat is never a bad idea.

                                    I wanna go H-H only..... ?

                                    Tuckstir NO NO NO...

                                    Don't you tell me what to do! ?

                                    Tuckstir do you want to go more LP or more strat sounding?

                                    I think more LP. That said, I don't think I have ever had proper Strat sound anyway. I pretty much know what I want to do, just frustrated because I wanted to do it yesterday already.

                                    All this extra info on wiring and tone and pups and switches....oi. So much to learn.

                                    This is pretty much where my head is leaning:

                                    Just with a completely different colour scheme....

                                    • V8 replied to this.

                                              V8 A HSS strat is never a bad idea

                                              But now you have me thinking.....

                                              Thing is also, the price for a set up decent pups is ridiculous! Especially single coils. I'll be spending more on the guitar than it is worth. Not sure how far I want to push the budget.

                                              • V8 replied to this.

                                                  @Tuckstir & @wern101 - Bwahaha, you two are cracking me up! ? ? ?

                                                  wern101 Thing is also, the price for a set up decent pups is ridiculous! Especially single coils.

                                                  Yeaahhhh...they are a bit silly. Though, you can get wilkinson's from blackbeard's den @ R175/ea. If they are anything like the one's I've heard, they are usable.

                                                  Humbuckers are easier to find 2nd hand - everyone upgrade's epi's - grab a set of those for R5-600. Avoid stock Ibby's unless you are going high gain and non-branded Cort pups at any price - they are terrible.

                                                  And -at worst- there is belcat - cheap but serviceable.

                                                  wern101 V8 The man reallly knows his gear. I mean like really ?

                                                  Look at all that gear!!! O.M.W! So many amps! Looks like a bloody music shop.

                                                  It literally is a music store - his dad is a long time trader and he is too in the biz. If you ever check out Norm's Fine Guitars on youtube, you'll see Joe regularly featured.

                                                        Write a Reply...