DrGonzo Hi guys (again!) I just picked up a BBE supa charger today and setting it up on my board.... However to my surprise it does not power my line 6 m5 - which in hindsight makes sense as the line 6 must draw quite a lot of power... As far as I am aware, out put 5 and 6 of the BBE provides 200mA each, is it possible to daisy chain output 5 and 6 and power the line 6 with 2 ports I beleive the line 6 needs about 350mm so this would theoretically work fine. If so, how do i chain them together? do i need a special Y power cable? do such things exxist and in that case where would I be able to find them? I guess i could still use the line 6 power supply, but i was really stoked on the luxury of being able to just plug one power cable in and BAM everything online, neat and tidy ?
ryanguit Hey you should be able to parallel the 5 and 6 ports in "normal" 9v 200ma mode. Giving you max 400ma if you don't overdraw from any of the other 100ma outs. What other pedals are you using? PS i read somewhere that for safety you should assume 500ma for m5. Are you sure it only draws 350ma?
Mr-M You can use one of these to get 400mA by combining outputs 5 & 6: http://t-rex-engineering.myshopify.com/products/green-current-doubler-cable Marshall should have them as they are the T-Rex importers.
