Danie
Hi,
I currently play through a Boss ME 50 multi effects pedal which I really enjoy and have no problems with.
Having a bit of luck my sister from the USA just let me know that shes coming for a visit and that shes bringing me a Mi Audio Blue Boy Deluxe and Crunchbox!!!
So my question is: is it possible to play through the multi effects and stomp boxes, would like to use the stompboxes for drive and then the Me 50 for effects.
How would my signal chain be? Will the stomp boxes go before or after the stomp boxes?
Or should I sell the Me 50 and replace it with the effects I want?
AlanRatcliffe
You'd want the drives up front of the multieffect. Usually you want drives after compression, noise gate trigger/sidechain, but you'd need an effects loop to do that, and the ME-50 doesn't have one. So you might have to stick to using the ME for EQ, modulation and time-based stuff for now and if you need one, add a pedal compressor up front first.
tonerider
Consider the Boss LS-2 Line Selector!
Set it up like this: The output from your guitar goes through your new stomp boxes first, then into the Boss LS-2, then on and into the front of the amp. Then you use one of the send/returns on the LS-2 to bring in the ME 50 when you want to. Use the normal in and outputs of the ME10. Your tone will remain pure into your amp and you can bring in the delays, choruses and other modulation effects of the ME50 with a flick of the toe.
Check out this link. This guy brings in 2 pre-set pedals into his signal chain before going into the amp. You can apply the same rule with your ME50.
Good Luck! ?
