Refinishing / Modding my Strat

wern101 · 2018-09-11T07:11:44+00:00

Morning guitar people! So as the title suggests, this is my first mod. I am scared to death. I realize all the more what a noob I am. I’ve been contemplatin...

Refinishing / Modding my Strat

wern101

Tuckstir always found it looks good wet, dull and lifeless when the stain has dried, and great when sealant has been applied

Well that is good news indeed. I mean, you kinda know that is what is going to happen, but at the same time worry it won't. Looking forward.

wern101

Not much progress here except for a happy mistake that I am going with. I wanted to just clean up the stain marks, make em nice and straight when this happened:

I think this looks nice and gives a bit of leeway w.r.t mistakes. Happy ?

I have also been contemplating two things:
1. Doing a cherry red stain on the flamed maple neck, and sanding it back - what do you think?
2. Sticking with SSS pickups, instead of HSS or HH. (When I buy that LP kit one day I will have my humbuckers)

Really a lot happening at work at the moment so little time to do anything else. Silly season approaching and all... :face_with_rolling_eyes:

V8

wern101 Digging that! Fun to see you and @Tuckstir keep on truckin' - love it!

Tuckstir

wern101

Cheery red on that neck would be awesome.. but it might clash with the body colours maybe do a test on some scrap wood first to compare..

If you are using a water based stain.. like Clou from Blackbeardsden.. an easy way to get the flame to pop with minimal sanding is to wipe it on with a cloth,, then immediately wipe it off, almost wiping all off with a damp/wet cloth..

Tuckstir

just to highlight what i was saying earlier about applying water based stains..
this piece of scrap pallet wood.. after a bit of sanding, stain was applied and then washed off again.. leaving this. no sanding has taken place since staining.

as with everything prep work is the most essential part,, never skimp on prep work.. makes everything so much easier.

wern101

Delays Delays Delays.

So the little box of goodies arrive. Not so good after all. No Tru Oil, instead a bottle of Teak stain. :face_with_rolling_eyes: Contact supplier. They are sorry. Will send ASAP.

Eventually get around to inspect the hardware and...
End cap for selector switch doesn't fit. Website says it must be ordered additionally but the thing arrives with one on already, wrong colour. The one i ordered does not fit.
Humbucker Pickup Rings do not fit the Humbuckers!! WTF!?!! Their website says the humbucker is sold without the ring, get one by clicking the link. Great. Ordered. Arrived. No fit.

As for making a pickguard - total ballsup. Figure I will order one from Raru and just mod it the way i want it to look.

Frustrated....

Tuckstir

ah man.. that sucks,

and about making the pick guard.. what happened?

wern101

Tuckstir and about making the pick guard.. what happened?

Tried to make one out of galvanized. Got pretty far, but doing the cut outs is a 'b1tch'. I can still do it, but will look really crap (not nice and smooth). To do a nice one with a water or plasma cutter will probably cost me around R1K - for a pickguard...erm.... no.

Still no reply from the supplier about my other issues.....

Tuckstir

wern101

If you can supply a autocad file, I can give you a laser cuter that can do it for less than half that.. especially if you drop my name...

or send me the file and I'll see what I can do..

klaasvakie

wern101

If you are willing to do the work yourself, you can buy time at Made in Workshop (http://madeinworkshop.co.za/). I've used them before, and they have a laser cutter, plasma cutter, lathe, cnc milling machine, drills, welders, benders, 3d printers etc. You pay per day of use. I usually wait until I have a bunch of things on my list and then buy a 10-day package which works out to R175 per day.

Tuckstir

klaasvakie

Problem is our esteemed friend wern101 Lives out in the middle of nowhere.
but looks like a cool place to go tinker about in

klaasvakie

Tuckstir d wern101 Lives out in the middle of nowhere.

Ah, forgot about that. Maybe there are similar maker spaces in the V-Town area? I know there are a couple in Joburg and a couple in Pretoria. I've only been to the one above though, quite close to where I work so it is convenient.

klaasvakie

klaasvakie spaces in the V-Town area

Eish @wern101, obviously had you confused, I think its @warrenpridgeon thats in the v-town area? I love Nelspruit, would move there in a heartbeat if I could find a job there.

wern101

Thanks Guys. Nelspruit isn't exactly 'nowhere', but yes, we don't have a quarter of the stuff they have in the big cities. And Nelspruit is known for being excessively expensive for anything not considered normal. (That means everything)

I will still see about the Pickguard. Hoping to get everything sorted before the Xmas break. At least I'll have a guitar to play again. Started with the Tru Oil coats yesterday.... ?

wern101

klaasvakie move there in a heartbeat

Says everyone I talk to. It's very 'clicky' down here. Had to carve out an existence when I moved here 18 years ago... has not been easy. But there are big developments and big opportunities opening up. Keep your nose to the job classifieds and I am sure something will pop up. I'd be nice to have a fellow forumite down here. When can even organise our own garage days. ?

klaasvakie

wern101 I have three good mates down there, so I do get to visit a couple of times a year. One is a very competent guitarist, but his guitar seems to spending too much time in the case nowadays --- kids + work I guess. I'll let you know when I'm there again, maybe we can do a garage day.

wern101

klaasvakie Sounds like a plan!

guidothepimmp

Hows the truoil experience treating you?

wern101

guidothepimmp Its been an interesting experience. The first coat went on and the Basswood soaked it all up. I did the 2nd coats last night and this morning and the colour is coming through nicely, with a bit of a shine. Loving it!
I noticed now that the finish feels a bit rough after the 2nd coat. Good time to break in the 1000 grit steel wool? Or should one continue with the coats and only 'sand' at the end?

I have also started tinkering with the metal bits of the guitar, trying to make em look weathered. Specifically the bridge and tuners. I think it worked out ok?

I really have to sort out my workshop too. Too many projects at the same time...

guidothepimmp

Maybe do 1 or 2 more coats.. then with 1500 grit.. hit a wet sand using truoil. Will take off the rough bits while filling any places with truoil. Dig the weathered look on the hardware man..

wern101

guidothepimmp So that 1500 grit you are referring to - this would be sandpaper right? I have steelwool as well - not sure which one would be best??

I saw some dudes on the net using Steelwool.....