So for the last few days I’ve been busy with a rebuild on a electric acoustic..
It’s a no namer that was badly damaged by the previous owner so I took it upon myself to rebuild and repair.
http://www.box.net/shared/usbtgje9q1
I taped off all the areas that I didn’t want to get paint on. I wasn’t happy with the shape of the headstock so I cut flair into the top.
http://www.box.net/shared/72hjuidyzi
After that I closed up a section of the hole for the preamp because it was too big.
http://www.box.net/shared/ehjd5nsdq5
I then sanded the whole thing and applied a primer and sprayed a white gloss around all the edges.
http://www.box.net/shared/skft5krxhy
http://www.box.net/shared/ljx1fkhj3z
http://www.box.net/shared/d1in1jpm2i
I then applied a stick on pin stripe around the edges and along the fret board and sprayed the entire thing black.
http://www.box.net/shared/i0mtg4uf1h
http://www.box.net/shared/cdnmlqrbmo
I then removed the pin stripe and Voila!…Gloss black with a white pin stripe along the edges.
http://www.box.net/shared/6p03r1m8eh
http://www.box.net/shared/ktj8gx17gd
Stay tuned for the next installment...refitting all the hardware!
